BlogIcon.png    TwitterIcon.png  YTicon.png  

Same-Day-Shipping-Sprayer-Depot
Call Us! 800-228-0905

  • offline-1295421357
  • offline-837801025

Sprayer Depot Blog

Diaphragm Repair on a Udor KAPPA 43 Diaphragm Pump

Posted by Marketing Manager on Fri, Feb 14, 2014

The Diaphragm Kit consists of 3 diaphragms and 3 sets of 2 O-rings/each. Udor Kappa 43 Diaphragm Repair KitFor this repair you will need:
  • A wrench
  • A screwdriver
  • ½” socket
  • 11/16” socket
  1. Loosen the bolts on one of the 3 head assemblies
  2. Remove the head assembly
  3. Remove the diaphragm, nut, and washer
  4. Remove the diaphragm
  5. Remove the sleeve, and drain the internal oil
  6. Loosen the bolts on the 2nd head assembly
  7. Remove the head assembly
  8. Remove the diaphragm, nut, and washer
  9. Remove the diaphragm
  10. Remove the diaphragm sleeve
  11. Repeat this process on the remaining head
  12. Clean the inside of the pump with carb or brake cleaner
  13. Replace the sleeve, lining up the holes on the sleeve with the holes on the piston
  14. The diaphragm has a beveled side; this side will be pointing out
  15. Replace the diaphragm, nut, and washer; tighten with a wrench
  16. On each side of the 3 outer head assemblies remove the inside of the valve cage, replace the spring, small seat (beveled side down), and large metal seat
  17. Place the valve assembly back onto the head and replace the O-ring with a new one
  18. The other side has the same pieces in the opposite order
  19. Replace the spring, seat, and large seat
  20. Replace the O-ring with a new one
  21. Repeat this process on all 3 head assemblies
  22. Replace the head assembly
  23. Tighten the assembly skipping bolts in a clockwise pattern to evenly tighten
  24. Replace the piston sleeve on the 2nd side
  25. Replace the diaphragm with the beveled side out
  26. Replace the diaphragm, washer, and nut; tighten with a wrench
  27. Replace the 2nd head assembly, tightening the bolts with a wrench
  28. Using non-detergent 40W pump oil; fill the open side of the pump to the brim
  29. Replace the final piston sleeve, lining up the holes with the piston
  30. Clean off excess oil  Replace the final diaphragm
  31. Replace the diaphragm, washer, and nut; tighten with a wrench
  32. Replace the final head
See how it's done...watch the Instructional Video!

Topics: Udor Kappa 43 Diaphragm Repair Kit, Udor Kappa 43 Repair, Udor Kappa 43/GR, Diaphragm Pump Repair Kit

Search This Blog

Subscribe

Shop Now

Shop All Kings Sprayers

Latest Posts