We’re always looking for ways to make spray nozzle selection easier and we’ve shared some tips of the trade in past posts right here on our blog. With new advances in technology and an ever-evolving line-up of options, we couldn’t resist sharing this Spray Nozzle Selection Guide and helpful information from our friends at Hypro.
Sprayer Depot Blog
Topics: Hypro, pest control, spray tips, Spray Nozzles, Sprayer Parts, sprayer nozzle, Sprayer Parts Guide, pesticides, herbicides, fungicides, spray tips, spray tip, spray tip selection, Sprayer Depot, spray nozzle, spray smarter, Sprayer Depot, Sprayer Parts, tip selector, tip selection, spray tip selector, Pesticide Application, Pesticide applicator, sprayer nozzle, Sprayer Nozzles, weed control, fertilizer, insecticide, plant health, spray tip guide, nozzle selection guide, Hypro, spray nozzle selection
Spray tips are the smallest and most overlooked components of a sprayer. Drift control spray tips use air induction to produce air filled droplets, which dramatically reduce drift compared to conventional tips. Here are the benefits:
- Reduce off target spray. Your neighbors don’t want your ag chemicals on their property.
- Improve efficacy. It is estimated that 30% of conventionally sprayed droplets drift off target, land on the ground, or evaporate (leaving the active ingredient inert). Reduce that drift to 2% and achieve better results.
- Improve coverage. Air filled droplets stick to their target while conventional droplets may bounce off. When the air bubbles break the surface tension of the droplet, the spray material becomes more dispersed on the target.
- Improve spray quality. The chemical label shows a droplet size category, which can vary from extremely fine to ultra coarse, at which the product must be applied for optimum results. Air induction tips produce more consistent droplet diameters than conventional tips.
- Save money. With improved efficacy and coverage you may require less chemical and less water to finish the job. With improved efficacy and coverage likely you will only need to spray once, saving money and time.
- Be environmentally responsible. Keep herbicides, pesticides, fungicides, and fertilizers confined to their targets and out of drinking water supplies and the aquifer.
Before you buy any spray tips, it is also important to know:
- Your spray technique: broadcast or banding
- Sprayer speed (in mph)
- Tip spacing (20 inches, etc.)
- Application rate (from chemical label)
- Spray tip flow rate (GPA or GPM)
- Spray pattern: flat fan or cone
- Spray quality (fine, medium, coarse, etc. from chemical label)
Armed with this information, use the Hypro SprayIT Calculator to select drift reduction tips. Hypro has designed this online calculator to make it easy to select the proper spray tip for your application. Given the information we just covered, all you need to do is select the type of application and input your specific application data and the calculator with do the rest.
Topics: sprayer, sprayer checklist, spray tips, Sprayer Parts, sprayer nozzle, Sprayer Parts Guide, spray equipment checklist, spray tips, spray tip, spray tip selection, Sprayer Depot, spray drift, Sprayer Depot, Sprayer Parts, spray tip calculator, tip selector, tip selection, spray tip selector, drift control spray tip, drift control