BlogIcon.png    TwitterIcon.png  YTicon.png  

Call Us! 800-228-0905

  • offline-1295421357
  • offline-837801025

Sprayer Depot Blog

3 Reasons Why Aluminum Frames Are Better

Posted by Sprayer Depot on Fri, Jan 13, 2017

Sprayer Frames: Steel or Aluminum? 

We often get asked what makes Kings Sprayers better than other sprayers on the market. Our response typically explains how the high quality components that are used to build Kings Sprayers result in a superior sprayer. For example, all Kings Sprayers are built with 6061 aircraft grade aluminum. 

In this blog post we'll discuss the benefits of aluminum frames and highlight three reasons why they're better than steel frames.

Take a close look at the two pictures below of a NorthStar steel frame sprayer that was recently brought to our Service & Repair Department. At barely a year old, this sprayer looks like it's ready for the junk yard! The paint has chipped off, the straps look dangerous and it won't be long before this frame starts to corrode and fall apart. So, while it may have cost less initially, in the long run it'll be a more expensive choice because the short life of the sprayer will result in the need to replace it with a brand new one.

Northstar Stainless steel sprayer.jpeg

NorthStar Sprayer.jpg

"Aluminum frames are often the best choice for spray equipment due to their resistance to rust and corrosion," said Sprayer Depot Sales Manager  Brandon Grossman . "Aluminum is also lightweight, typically 1/3 the weight of steel, which makes the wheeled sprayers easier to move around. Plus, because of the lighter weight, there's less wear and tear on any vehicle transporting a skid sprayer. We have had local customers bring in their 15 year old sprayer for pump repairs and the frame still looks brand new! It never needs a new coat of paint.  

In some situations, such as larger capacity sprayers with more weight, a steel frame may be a consideration," added Grossman.  "Steel is less likely to bend under weight, but this is only in extreme circumstances."

3 Benefits of Aluminum Sprayers 

  1. Aluminum sprayers will never rust or need to be painted.  All Kings Sprayers are built with 6061 aircraft grade aluminum so they will never rust or require painting. 
  2. Aluminum sprayers are easy to maneuver.  A lightweight sprayer is much easier to maneuver than a steel sprayer, especially when spraying tight areas such as greenhouses, orchards or nurseries.
  3. Aluminum sprayers are chemical-resistant. Unlike steel sprayers which will corrode over time, aluminum is chemical-resistant so maintenance is kept to a minimum. 

To learn more about the advantages of aluminum frames, and see the high-quality craftsmanship of  Kings Sprayers, review this previous blog post

Topics: lightweight aluminum sprayer frame, Kings Sprayers, 6061 Aluminum Frame, Steel Frame

5 Advantages of Aluminum Sprayer Frames

Posted by Sprayer Depot on Mon, May 30, 2016

The frame of your sprayer should be sturdy, long-lasting and able to withstand the abuse from outside elements. Kings Sprayers® are built using the highest-quality parts and materials. This is why aluminum is the material of choice for all of our frames. 

5 Advantages of Aluminum Frames

  • Ease of Maintenance:  Unlike steel frames, aluminum sprayer frames are chemical resistant and will never rust or need painting.
  • Proven Durability: Made out of 6061 aircraft grade aluminum, our frames are built to last!
  • Affordability: Aluminum is readily available, making it an affordable option that won't sacrifice quality.
  • Weight: Eliminate excess weight on your vehicle by choosing aluminum; it is lightweight making it easier to transport and pull from one job site to another. 
  • Plenty of Options: Our frames offer versatility with a variety of configurations fit for every application.

Types of Frames






•   Pest control

•   Trees

•   Lawn

•   Trucks

•   UTVs

•   Trailers

•   Boats



3-Point Hitch

•   Athletic fields

•   Crop fields

•   Golf courses

•   Lawn

•   Pastures

•   Tractors



•   Athletic fields

•   Golf courses

•   Lawn

•   Pastures

•   Trailers

•   ATV

•   UTV

•   Golf carts



•   Greenhouse

•   Orchards

•   Nursery

•    Hand


Take a closer look at the craftmanship of our aluminum frames:






If you need a special configuration, we can do that too! Just contact us today and we can get started with a FREE quote.


Topics: lightweight aluminum sprayer frame, 6061 Aluminum Frame, sprayer frame, aluminum frame

Product Highlight: Large Capacity Kings Sprayers

Posted by Sprayer Depot on Tue, Dec 01, 2015

In this edition of Product Highlight we are featuring three popular models from our Kings Sprayers® large capacity sprayers. The Kings Sprayers® product line offers a variety of sizes, styles, pumps and engines to fit your needs. The aluminum frames are heavy-duty and built to ensure proper support to different sized tanks. They are also lightweight, chemical resistant and will never rust or need painting. Depending on the tank's size and application we also offer a few models, like the KT510P12042E, with a steel frame. Available poly tank sizes range from 15 gallons all the way to 1,000 gallons. To facilitate the operator's handling, the walls of the tanks are translucent for easy level viewing and are equipped with gallon indicators.

Whether you need a DOT approved trailer sprayer, or a skid sprayer you can mount on your truck, we have them in-stock and can also customize any model to your needed specifications.

Kings Sprayers® 510 Gallon Highway Ready Trailer Sprayer 

This DOT approved trailer sprayer is great for spraying trees up to 80' in the air. It features a high flow pump which is great for drenching and transferring liquids quickly. 



  • 510 Gallon Free Standing Horizontal Leg tank
  • 20 HP GX630 Electric Start Honda Engine
  • Udor KAPPA-120/GR Diaphragm Pump (35 gpm, 700 psi)
  • Electric Hose Reel with 300' of 3/4" ID Spray Hose
  • DOT-Approved Tandem Axle Steel Frame with VIN

Kings Sprayers® 335 Gallon Skid Sprayer 

This sprayer features a 335 gallon poly tank and can be used in truck beds, utility vehicles, boats KS335P70-Actual.jpgand trailers. Skid sprayers are ideal for tree-spraying, pest control and lawn applications.


  • 5.5 HP GX160 Series Honda Engine
  • Hypro D30GRGI Diaphragm Pump (9.5 gpm, 580 psi) 
  • Electric Hose Reel with 300' of 1/2" ID Hose
  • 6061 Aircraft Grade Aluminum Frame

Kings Sprayers® 200 Gallon 3-Point Hitch Sprayer 

3-point hitch sprayers are the perfect option to spray large areas like golf courses, athletic fields and pastures. This model features a 200 gallon poly tank and can easily spray up to 30' through the spray gun.3PT200B12-Actual.jpg


  • Hypro 7560XL "Silver Series" Roller Pump
  • 12' Spray Boom with Manual Selector Valve
  • 50' of High-Pressure Spray Hose 
  • A High-Output Eight-Roller PTO-Driven Pump Delivers 12 gpm at 300 psi
  • 6061 Aircraft Grade Aluminum Frame
  • Adjustable Pressure Regulator and Hydraulic Jet Agitation

Shop All Kings Sprayers

We can customize any sprayer to meet your needs so just give us a call and we'll be happy to help. Plus, many of our most popular models are available for same-day shipping!

Topics: Trailer Sprayer, Hypro, Spray Guns, DOT, Kings Sprayers, Skid Sprayer, sprayer, roller pumps, sprayer tanks, Pump, poly tanks, 6061 Aluminum Frame, honda engine, dot approved, 3-point-hitch, pumps, product highlight, large capacity

Kings Sprayers: Building a Sprayer

Posted by Sprayer Depot on Fri, Sep 25, 2015


Building sprayers is more than a job, it's a passion. Passion for ensuring customers' satisfaction, for finding set-ups that improve efficiency and ease of application, and most of all, a passion to build quality products that are cost-effective and time-saving. We are passionate about what we do and we are proud to manufacture Kings Sprayers in Orlando, FL. 

Do you want to learn more about how we build  Kings Sprayers? We thought you would so we've outlined the basic steps from start to finish.

The first step after we've received your order is for our production manager to go over the work order for your specific sprayer model. If it is a custom sprayer, he makes sure that it can be built according to your specifications while also following safety standards. If our production team identifies something that could be improved or changed to give you a product that may better meet your needs, our team will offer the solution and work with you to design the best set-up for your needs.  We love it when customers take an active role in customizing their sprayers. After all, no one knows your job better than you do! 

Then we move to the manufacturing process, where our welders will build a sturdy, yet lightweight, aluminum frame that will support all components in your sprayer. The next step involves assembly and this is where everything comes together. Our assembly technicians will carefully install all the individual components (hose reels, pumps, boomless nozzles, tanks, engines etc.) and make sure that every part is set up correctly. The unit then moves to our quality control station where it will be thoroughly tested.

Building Kings Sprayers at our Orlando facility instead of just outsourcing manufacturing means that we have control over quality, can offer better customization along with great prices and faster delivery times. We stand behind our products and can guarantee that our sprayers are built to the highest standards of quality and with the best available parts.

Have any questions or comments? Share them below!

Topics: 4-Wheel Sprayer, Custom-built Skid Sprayer, Hose Reel, Hose Reels, diaphragm pump, Roller Pump, Skid Sprayers, Boomless Nozzle, Pump, spray gun, poly tanks, 6061 Aluminum Frame, honda engine, 3-point-hitch

Search This Blog


Shop Now

Shop All Kings Sprayers

Latest Posts