BlogIcon.png    TwitterIcon.png  YTicon.png  

Same-Day-Shipping-Sprayer-Depot
Call Us! 800-228-0905

  • offline-1295421357
  • offline-837801025

Sprayer Depot Blog

Sprayer Depot

Recent Posts

Choosing The Right Spray Gun

Posted by Sprayer Depot on Wed, Jun 24, 2015

In the past, we've talked about the importance of selecting the right spray tip for your application. Since spray tips and spray guns go hand in hand it is only appropriate that spray guns also get their fifteen minutes of fame. After all, ensuring that you are using the right one will improve your spraying efficiency. When choosing a spray gun consider the following: 

Read More

Topics: JD9-C Spray Gun, Sprayer Depot, spray tips, spray gun, psi, gpm

How To Replace a SHURflo Pressure Switch

Posted by Sprayer Depot on Fri, Jun 19, 2015

The pressure switch is by far the most overworked part of your pump. It is constantly running which makes its life expectancy shorter compared to other parts. If you notice that the pressure has decreased, the switch Pressureswitchleaks or if your pump won't run or won't shut off then you might need to replace the pressure switch. Replacing the switch is an easy and inexpensive DIY project that will save your equipment unnecessary downtime.

What You'll Need:

Pressure Switch Assembly Kit

Drill/Screwdriver

Installation Process: 

1. Unplug the red power supply wires and inspect them for possible burnt-out*

2. Unscrew the 3 screws to remove the pressure switch

3. Remove the old diaphragm and replace with new one making sure it is flush**

4. Screw the pressure switch back in place

5. Reconnect the power source wires and you are done!

 

*Kit includes replacement wires 

** An optional Teflon seat is included

Read More

Topics: Sprayer Depot, Sprayer Depot Instructional Video, Shurflo, Shurflo pressure switch assembly, quick set-up, quick start, pressure switch

Guest Post: 5 Ways a Control Unit Is Better Than a Relief Valve

Posted by Sprayer Depot on Wed, Jun 17, 2015

Contributed by Guest Blogger: 
Mark Techler,  Factory Representative - Hypro & SHURflo Ag and Industrial Pumps and Accessories

 

Sprayers with positive displacement pumps need some way to bypass the flow of liquid when the gun or boom is shut off. Let’s compare a typical relief valve, like a TeeJet S6815 series valve, to a commonly used control unit, like Hypro GS40GI, which includes a relief valve and much more.

Read More

Topics: Hypro, Diaphragm pumps, sprayer, spray tips, Guest blog, relief valve, control unit

Search This Blog

Subscribe

Shop Now

Shop All Kings Sprayers

Latest Posts